WMT CNC mill machine has several functions: milling ,drilling, tapping, boringetc. It’s suitable for cutting, processing and repairing single or small batches parts of all professions. It is of high quality, good function, easy operation, and not limited to skill operator.Now we will introduce this new product- ZX32G/1(is an upgrade to the ZX32G) with variable speed.
Features:
Reversible spindle and tapping controls.
Coarse/fine spindle downfeed with stops.
6-Speed gearbox.
Precision-ground dovetail ways and column.
Headstock tilts left and right.
Specification
Specification
|
ZX32G/1
|
Max. drilling capacity
|
32mm
|
Max. tapping capacity
|
M16
|
Max.face milling capacity
|
63mm
|
Table size
|
700×190mm
|
Spindle taper
|
MT3/R8
|
X-axis travel
|
380mm
|
Y-axis travel
|
230mm
|
Z-axis travel
|
350mm
|
Spindle travel
|
75mm
|
T-slot size
|
12mm
|
Spindle speed range (variable)
|
50-2300rpm
|
Headstock tilt left and right
|
90 degree
|
Base size
|
542×340mm
|
Max. distance from spindle center to column
|
214mm
|
Max. distance from spindle to table
|
400mm
|
Min. distance from spindle to table
|
50mm
|
Motor power
|
750W
|
N.W/G.W
|
170/200kgs
|
Details of mill machine as below:
Preparing for milling:
- The micro feed handle wheel is used for adjusting feed depth. Revolve handle clockwise to make the worm gear connect with handle base, turn the micro handle wheel to make milling cutter reach demanded place. Regarding its rigidity, the socket couldn’t extend too long.
- The locking socket handle is used for locking socket. You can use locking handle to lock socket when the milling cutter up to demanded place.
- There are two lock screws at the front of and in the left of table separately to lock the table. If necessary, you can lock the table to stop it moving.
- The movable fixed block in the front of the table is ready for spacing as working. Loosen screw, move the fixed block to the requisite position, then tighten up the screw before operating.
- When you want to change the gearbox angle in the left or right, please loose the three nuts linking with gearbox and the slip saddle, then adjust it to demanded place. Lock the three screws again.
- If the machine has a strange voice or has breakdown. You should cut off power source at once, to find reason and fix it in time.
Standard accessories:
1.Drill chuck key
2.Drill chuck arbor R8
3.Bottle for oil
4.Screw driver
5.Screw driver flat #2
6.Hex wrench set(5pcs)
7.Wrench 17x19mm open-ends
8.Spindle wrench 40mm
9.Drawbar
10.T-bolt M10-1.5
11.Hex nut M10-1.5
12.Flat washer 10mm
13.Drill chuck B16 3-16mm
14.Tool box
If you want to know more information for this mill machine ZX32G, pls contact with us.
Email:info@wellmachtool.com