Shaper is mainly used for planning the plane on the small and medium-size workpieces in small batch production of a single piece, forming the surface and grooves .
|Maximum planing length||350mm|
|Maximum distance from the bottom of the working table||330mm|
|Tool frame travel||110mm|
|Sleeper reciprocating times (per minute)||32/50/80/125|
|Main motor power||1.5W|
|The maximum size（width*thickness）of the handle||20×30mm|
|The size of the T groove in the center of the worktable||14mm|
|Angle of rotation||±90°±55°with(vice)(worktable）|
|Mechine tool weight (about)||1100/1250KG|
- Planner bench can turing angle of the table with horizontal and lift moving mechanism; for planning the inclined plane, thereby expanding the scope of use.
- Planner feed system uses a cam mechanism to adjust the feed rate. It is very convenient to change the feeding rate.
- Planer equipped with cutting system overload safety angencies. Once occur careless operation, external influences or cutting overload, it will shift to self-skid, and non-sestructive the machine.
- Gap between the ran and the bed rail, the speed gear and the main sliding guide surface, will be lubricated by the pump shot oil.
- Planner is equipped with a clutch and parking brake device. So do not need to cut off the power when changing the speed, stard the machine or braking the machine.