Mainly used for turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thead of shaft, etc., with high efficiency and accurate processing. WMT BRAND CNC metal lathe CK0640 will offer you perfect service by excellent performance, strong rigidity, long-term stability and higher accuracy.
Specification
| Specification | CK0640 |
| Max.swing over bed | 260mm |
| Diameter of X axis ballscrew | 25mm |
| Thread pitch of X axis ballscrew | 4mm |
| Diameter of Z axis ballscrew | 32mm |
| Thread pitch of Z axis ballscrew | 6mm |
| X-axis travel | 250mm |
| Z-axis travel | 180mm |
| Pneumatic chuck | 32mm |
| Toolpost | 4 position electrical toolpost |
| Main Motor | 3kw |
| Motor for Coolant pump | 90W |
| Spindle bore | 49mm |
| Spindle hole after install pneumatic | 41.5mm |
| Re-positioning accuracy | 0.01mm |
| positioning accuracy | 0.01mm |
| Servo motor torque | 4.0NM |
| CNC controller system | after 980MDC |
| Machine size | 1760x1070x1730mm |
| G.W | 700kgs |
Main Features
- CK0640 can be permanently memory coordinates after power offer,you do not need worry if people moved the position,;it can continuely Processing half of the workpiece.
- Machine often caused alarms because of these widgets,CK0640 can set soft limit,so that can save machine maintenance time and cost.
- High precision,CK0640 use Absolute servo encoder is 17 bits
- It is suitbale for Mass production for small workpiece, High efficiency, high precision.
Machine details
