Description
Lathe is a machine that rotates a workpiece about an axis of rotation to perform various operations such as cutting, sanding, knurling, drilling, deformation, facing, and turning. WMT BRAND bench lathe CW61125Q will offer you perfect service by excellent performance, strong rigidity, long-term stability and higher accuracy.
Specification
| Specification | CW61125Q |
| Max. swing over bed | 1250mm |
| Bed width | 755mm |
| Max. workpiece length | 1500/ 3000/ 5000/ 6000/ 8000/ 15000mm |
| Max. swing over toolpost | 860mm |
| Max. turning length | 1300/ 2800/ 4800/5800/7800/14800mm |
| Toolpost feed kinds each spindle rotate | 56 kinds |
| Toolpost cross feed range each spindle rotate | 0.1-12mm/r |
| Toolpost longitudinal feed range each spindle rotate | 0.05-6mm/r |
| Upper toolpost | 0.025-3mm/r |
| Metric thread | 44 kinds 1-120mm |
| Inch thread | 31 kinds 28-1/4 teeth / inch |
| Module thread | 45kinds 0.5-60mm |
| Pitch thread | 38 kinds 1/2-56D.P |
| Spindle bore | 130mm |
| Spindle front taper | Metric 140 |
| Spindle speed steps and range forward | 21 kinds 3.15-315r/min |
| Reverse | 12 kinds3.5-278 r/min |
| Max.section of tool | 45×45mm |
| Toolpost longitudinal travel | 630mm |
| Upper toolpost travel | 300mm |
| Toolpost rapid movement Longitudinal/Cross/Upper | 3470/1870/935mm/min |
| Center sleeve dia and travel | 160×300mm |
| Tailstock taper | MT6 |
| Tailstock longitudinal movement | ±25 |
| Main motor | 22KW |
| Main transsion V belt specification | 2134C 2235C 2540C |
| Carriage rapid motor | 1.5KW |
| Coolant pump | 90W |
| Coolant pump flow | 45L/min |
| 4-jaw chuck | 1000/1250mm |
| Steady rest | 50-470mm |
| Follow rest | 50-220mm |
Main Features
- Perform internal and external turning, taper turning, end facing, and other rotary parts turning;
- Threading Inch, Metric, Module and D.P.;
- Perform drilling, boring and groove broaching;
- Respectively with through-hole spindle bore, that can hold bar stocks in larger diameters;
- Both Inch and Metric system are used on these series lathes, it’s easy for people from different measuring systems countries;
- There are hand brake and foot brake for users to choose;
- Power supply of different voltages (220V/380V/420V) and different frequencies (50Hz,60Hz) are available.
Machine details
Spindle bore 130mm
Tailstock
DRO for optional
Electrical box
