Steel Pipe Threading Machine Q1319 is mainly used for turning the internal and external threads including metric and inch thread, as well as having all the common functions of normal engine lathe such as processing the inner bore and end face of shafts and disks, this machinery is equipped with taper guide bar device which enables this series to process taper thread.
|Max dia.swing over bed||mm||630|
|Max dia.swing over cross slide||mm||350|
|Max.length of work-piece||mm||1500|
|Width of bed||mm||550|
|Power of spindle motor||Kw||11|
|Spindle speed||r/min||24-300 FWD.12 steps|
|Z axis feed grade/range||mm/r||26/0.07-1.33|
|X axis feed grade/range||mm/r||22/0.02-0.45|
|Carriage rapid traverse speed||mm/min||4000|
|Cross slide rapid traverse speed||mm/min||2300|
|Metric thread grade/range||mm||2024/1/14|
|Inch thread grade/range||T.P.I||1940/2/28|
|Module thread grade/range||mm||0.5-7.5|
|DP thread grade/range||D.P.||28-2|
|Traverse of cross slide||mm||320|
|Max. Traverse of turret||mm||200|
|Tailstock quill travel||mm||250|
|Tailstock quill Dia./taper||mm||Φ100/（MT5#）|
- Big spindle bore and double chuck allow clamp and process big diameter pipes.
- Integral machine bed adopts high strength iron to realize high rigidity and precision.
- Ultrasonic frequency quenched guide-ways are hard enough for good wear-resistance.
- Equipped with a taper guide bar device this enables the machine to process taper threads.