CK6150 is suitable for turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thead of shaft, etc., with high efficiency and accurate processing.
| Specification | CK6150 |
| Capacity | |
| Chuck size | 10” |
| Max. swing dia. over bed | 500mm |
| Max. swing dia. over slide | 280mm |
| Distance between center | 750/1000/1500/2000mm |
| Width of bed | 400mm |
| Spindle | |
| Spindle speed range | 150-1500rpm |
| Spindle bore | Φ82mm |
| Max. dia. of through-hole | Φ60mm |
| Spindle nose | A2-8(*105mm for A2-11) |
| Spindle taper | Φ90mm 1:20,*105mm for 105mm 1:20 |
| Axis | |
| X axis travel | 350mm |
| Z axis travel | 750/1000/1500/2000mm |
| X/Z axis rapid traverse | 6/8m/min |
| Turret | |
| Type | Electrical type |
| No. of tool stations | 4,*6,*8 position |
| Max. section of tool | 25x25mm |
| Tailstock | |
| External diameter | Φ80mm |
| Travel of tailstock quill | 150mm |
| Taper of tailstock quill | MT5 |
| Motor | |
| Spindle motor power | 7.5kw,*11kw |
| Coolant pump power | 180w(120w) |
| Machine Dimensions | |
| Overal dimension (L×W×H) | 2420/2860/3110/3620x1600x1750mm |
| Packing size(L×W×H) | 2600/3050/3350/3850x1800x2220mm |
| N.w | 2750/3100/3350/3550kg |
| G.w | 3000/3450/3750/3950kg |
